Were you looking for my Woodworking Masterclass videos?
Click here if you were.
Here are a few videos that have been taken of woodworking events where I have demonstrated or demonstrations of techniques which may be helpful to new (or more advanced) woodworkers. They have been taken by members of my family and are by no means professional videos. Be sure to subscribe to my YouTube channel to get updates when I post a new video.
In this episode Paul Sellers shows you how to fit the well board onto the leg frames. This gives the [..]
{ytthumb}
How to build a workbench (Part 11) fitting the well board with Paul Sellers
Sharpening a saw can be one of the most daunting sharpening tasks for a woodworker. Paul Sellers tri [..]
{ytthumb}
How to Sharpen a Woodworking Handsaw with Paul Sellers
Paul Sellers shows how to prepare wood from it s rough sawn state into useable stock. He goes into d [..]
{ytthumb}
How to make rough sawn wood straight, smooth and four square (part 1) with Paul Sellers
In this episode Paul Sellers shows how to continue the assembly. He shows how to attach the aprons t [..]
{ytthumb}
How to build a workbench (Part 10) (assembly part 2) with Paul Sellers
In this episode Paul Sellers shows how to begin the assembly. First he shows how to glue up the H [..]
{ytthumb}
How to build a workbench (Part 9) (assembly part 1) with Paul Sellers
In this video Paul Sellers shows how to make a simple shooting board from pine. This is an important [..]
{ytthumb}
Paul Sellers shows how to make a Shooting Board
Paul Sellers is a master woodworker who writes, blogs about woodworking as well as being the main te [..]
{ytthumb}
Paul Sellers announces his tour with The Woodworking Shows
Paul Sellers shows in this short video how to make a Poor Man s Router . This is a hand router that [..]
{ytthumb}
Paul Sellers Poor Man s Hand Router
In this episode Paul Sellers shows how to finish off the protruding tenons. He then shows how to cut [..]
{ytthumb}
How to build a workbench (Part 8) Preparing the aprons with Paul Sellers
In this episode Paul Sellers shows how to cut the tenon part of the mortise and tenon joints. To fin [..]
{ytthumb}
How to build a workbench (Part 7) Cutting Tenons with Paul Sellers
We are launching a new online broadcast training programme. Find out more: https://woodworkingmast [..]
{ytthumb}
Introduction to the Woodworking Masterclass Series
In this episode Paul Sellers shows how to cut the mortise joints. He also explains why he chooses to [..]
{ytthumb}
How to build a workbench (Part 6) Chopping the Mortises with Paul Sellers
Paul Sellers demonstrates his somewhat unique method for cutting tenos. In this short video he shows [..]
{ytthumb}
Paul Sellers on Splitting and Paring Tenons
Paul Sellers shows how to hold a marking gauge. This is in answer to a question posted on his blog a [..]
{ytthumb}
Hand Tool Technique: Holding a Marking Gauge
Finally, Paul Sellers shows how to prepare laminated bench legs from 2 x 4s (US, 4 x 2s). Then he sh [..]
{ytthumb}
How to build a workbench (Part 5) Making and Preparing the Legs with Paul Sellers
Paul Sellers shows how to make a dovetail template that will help guarantee accuracy as you lay out [..]
{ytthumb}
How to make a Paul Sellers Dovetail Template
Paul Sellers continues this series on building a workbench without a workbench. In this section he s [..]
{ytthumb}
How to build a workbench (Part 4) Making the aprons and the well board with Paul Sellers
Paul Sellers demonstrates cutting a mortise joint by hand. He is using a method of showing the insid [..]
{ytthumb}
Cutting a Mortise Mortise chisel vs bevel edge chisel with Paul Sellers
We now have the bench top glued up and surface planed. In this section Paul Sellers shows you how to [..]
{ytthumb}
How to build a workbench (Part 3) Cross cutting the top with Paul Sellers
Paul Sellers continues this tutorial on how to make a workbench without a workbench. In this section [..]
{ytthumb}
How to build a workbench (Part 2) Planing and preparing the top with Paul Sellers
How do you build a workbench without a workbench? This is a somewhat difficult part of getting into [..]
{ytthumb}
How to build a workbench (Part 1) Laminating the top with Paul Sellers
Paul Sellers demonstrates using this unusual woodworking plane that does not smooth the surface but [..]
{ytthumb}
Spill Plane What does it do? by Paul Sellers
Smoothing planes are incredibly diverse if you know to use them. In this demonstration Paul Sellers [..]
{ytthumb}
Raising a Panel with a Smoothing Plane by Paul Sellers
Here is the new school waiting for the benches and the first intake of students.
{ytthumb}
New Legacy School of Woodworking New York with Paul Sellers
Paul Sellers shows how to flatten and shape the sole of a bench plane. This technique is the first s [..]
{ytthumb}
How to flatten the sole of a plane by Paul Sellers