I just bought a Disston 14″tenon saw on ebay the teeth are in bad shape i will have to cut new teeth. I was wondering if 12 ppi would work as well as the original 14 ppi. Thanks Paul, I always enjoy your blog, great information.   Also building a new bench per your book. Thanks again,




There are some issues here, Dennis. We should be entering the realms of fleam cut and ripcut here.  When teeth get larger we obviously have less teeth per inch run of saw. The larger the teeth the nearer we come to shaping the teeth to a fleam cut. 12 ppi can go either way and a ripcut pattern will work fine for tenon cheeks and other with-the-grain cutting, but not always so for many if not most crosscutting aspects of the same joints and so this will automatically necessitate a second, smaller-toothed saw for crosscutting shoulders. Not really a big deal as generally we tend to keep a small saw to hand too. The problem lies more with large tenon cutting in coarse-grained woods such as oak, where the large teeth tend to tug and rip at fibres when used on any crosscutting work; rather than severing. As most tenon saws are sharpened to a ripcut pattern, you will definitely need a second saw and especially is this so for large work. On the other hand, restoring a 14-16ppi pattern size will enable you to do what most people do and that is sharpen with a progressive ripcut pattern that cuts both with and across the grain using only a single saw. Alternatively you can put a passive rake on the teeth, but then that compromises the power of the ripcut, which is not what you want for tenon cutting at all.


  1. rfrancis on 24 August 2012 at 11:22 pm

    This is gobbledegook… perhaps you could stop and think before you write once in a while.
    And then write something that makes sense or point us to a useful link.

    • Josh on 25 August 2012 at 12:14 pm

      I have to say that I disagree with what you have written, and quite frankly if you do not appreciate the style in which Paul writes his posts, simply do not read them. There are plenty of us who enjoy what he has to say and how he says it.

  2. John on 25 August 2012 at 4:37 am

    The only part I do not understand is the progressive ripcut pattern (although I haven’t taken the time to see if you explain it in your fine book.) Could you please review its characteristics? Thank you.

    • Paul Sellers on 25 August 2012 at 9:38 am

      There are two types of progressive teeth and both ways work the same and produce similar results that are in fact almost indistinguishable.
      Two modern day people are having one type made on their saws. Their type starts with smaller teeth and progress to larger teeth after a short distance. this isn’t new and neither are they recent inventions. They are a little more difficult to establish by hand methods although I have done it on saws myself.For those of us sharpening by hand we simply level the file on the first 1-2″ of teeth depending on the size of the teeth and the type or shape we want to ‘ease’us into the cut. This is very simple to do and even when people come to the classes with other makes of saw . they often adopt this method to their saws before they leave.

  3. Paul Sellers on 12 August 2013 at 6:06 pm

    The chisel cut simply deepens the registration line for the file to rub up against.

  4. Pete Taran on 21 January 2017 at 6:01 pm

    I’ve literally sharpened thousands of backsaws, and the assertion that most are supplied with rip teeth is indeed poppycock. The vast majority sold came with either 13 or 14 point crosscut teeth. Large saws meant to use with a miter box had 12 point crosscut teeth. It is very rare to find a saw that has rip teeth unless a previous owner filed them in.

    Further, while progressive teeth are nice, suggesting this to a novice is equally as foolhardy. It’s like someone asking how can they learn to read and in response handing them a copy of Moby Dick. All the main makers on this side of the Atlantic never supplied their saws with progressive teeth, and somehow people managed for all these years. There are many places to learn to file saws online. Take a quick google, get a 6″ Double Extra Slim Taper and try it out.

    • Paul Sellers on 21 January 2017 at 9:52 pm

      No matter. The question is about tenon saws not the generic “backsaw” Americanism here so not really apples for apples. In 95% of cases craftsmen-sharpened saws, that is the man at the bench sharpening his own saws who never sent their saws away because they couldn’t be without them, sharpened their saws for ripcutting because of the speed and effectiveness of cut. Mostly shoulders were cut with smaller tenon or dovetail saws which were also sharpened for ripcut because yet again we see that the majority of cuts were indeed ripcut. It’s simple if you think about the physics of it really. A crosscut saw would be pretty useless for the majority of the work in tenon and dovetail joints, the two primary needs for tenon-type saws.

  5. Peter Taran on 21 January 2017 at 10:59 pm


    Perhaps that’s how craftsman roll on your side of the Atlantic, but here in America, people use backsaws filed crosscut for crosscutting tasks (tenon shoulders, slots across grain, etc) and backsaws filed with rip teeth for ripping tasks (Tenon cheeks, dovetails, etc). I’m guessing people who made them and sold them as such intended them to be used in this manner, otherwise they would have just sold one saw with one tooth profile. Further, if what you said was indeed true, then you would see only vintage backsaws with rip teeth, not crosscut teeth which is the case. Your reputation and prolific writing is great, but you are WAY off base in this instance.

  • Paul Sellers on Someone Wrote MeThank you. I don't think that anyone should give up their machines because I or anyone else gives the impression that they should. I doubt that I have ever said to anyone don't use…
  • Kurt on A Gem of a RemnantAnd here I thought I was the only one who found this to be true.
  • Adam on Someone Wrote MeReally interesting discussion here. Could be just semantics, but I think machine woodworking is more of an ability. Something that pretty much all humans have - to be able to feed…
  • Stuart Woodcock on Someone Wrote MeHaving just started my first large project, a 3.5m x 0.85m outdoor table. I have watched a lot of Paul's videos to gain knowledge and inspiration. I can tell you from a novice pers…
  • Stephen Tyrrell on The Draw of Skilled HandsIt goes back much further than that. It was written in the 1920's and has been recorded many many times. Still being recorded by modern swing bands today. A great song and a great…
  • Stephen Tyrrell on Someone Wrote MeIt may be true that your efforts will not influence the mass producers Paul, but you have encouraged, tutored and trained thousands of "lifestyle" woodworkers in a craft that they…
  • Michael McGinnis on Someone Wrote MeThe book "The Perfectionists: How Precision Engineers Created the Modern World", by Simon Winchester, describes very well how we ended up the way we are today; without the skilled…