Skip to content

I Bought Another Bullnose Plane

A new Stanley #90 is a true treasure to own and its design is flawless.

In my view the Stanley #90 bullnose plane, the one with depth adjustment, not the 90J, is a world best. I find the sloped nose gives better entry in awkward corners rather than the more blocky, squared off ones. It also fits my hand best. I bought an identical one to my own on eBay in near new condition. Whereas mine cost me about £4 new, and the one shown cost £13.43 new, the eBay cost to me was over £56 plus shipping. My recent posts about things past and passed are not meant to be nostalgic memories, even though they inevitably are, they’re to more link issues people today may know little or nothing of to better understand that such tools are far from obsolete or redundant to today’s needs, and also to say that no new design exists that functions better or offers greater longevity. Whereas many elements of life rely on changing designs by virtue of being more fashionable rather than better by design—what’s under the hood or bonnet is most often the same or similar to what’s been there for decades. Woodworking hand tools seem to have somehow resisted fashionability; practicality itself has perhaps been able to defy or at least defer change for changes sake to the point that the planes listed next all look the same because they are quintessentially the same plane made by different makers. No matter which way they slice it, Clifton, Modern day Stanley, Quang

My beloved bullnose Stanley #90 after decades of working for me.

Sheng, Lie Nielsen, Juuma, WoodRiver or the authentic version Stanley-owned, the BedRock, they simply plane wood smooth. You could buy any one of them and they have each retained the same basic and essential elements designed way back over a century ago. I would find that bemusing were it not for the fact that the design was indeed so perfected no one could actually contribute to give us much more than some improved metal conditioning, though each in the process of making makes their own claim to the betterment of the design. Very little has in fact changed and that stands testimony to the original plane’s all encompassing design. Now I am glad that Lie Nielsen picked up the original design as it would have been sad to see it die on the vine of progress. Copied or not, and they were all indeed copies from the basic Stanley stable and nothing apart from the belt sander has come along since to replace it.

Here the old and the newer sit side by side ready for work. One has been used for decades. I still use it most days.

So here I am with my small collection of bullnose planes all lined up side by side thinking to myself they are all nice, but the very best of them is my now vintage Stanley #90. I reach for it over all the others because it so hits the right compact spot when it nestles down on the palm of my hand like a cat in a wool-lined basket. Hannah and I were talking about it this morning. She likes hers over all others too. She says is lies in her tool chest and her hand so perfectly.

Straddle the plane like this, trace your thumb and fingers to the wood either side, and you can take off a good, clean and deep arris.

I thought a lot about this plane. In my view it’s worth way ahead of the block plane. It’s more useful I think and started to think then about when I bought it too. I remember at the time borrowing someone’s at work because I didn’t yet own one myself. They would lone me but you sensed the reluctance. I was working for one of my own.

Inside the confines of a drawer recess the bullnose adjusts the runner to ease the passage.

By that I mean doing woodworking for a living and that working was what would hopefully make enough money to soon buy one so I could make my living using it. I didn’t have savings, money elsewhere to draw from, nor a well off or rich family. Any money I got was what I worked for. I was fairly poor but relatively rich. Anyway, I saved up for it from my wages and eventually Mr Cheapie came in his green mini van with one for sale and I’d been waiting for the day when my order would come in and I bought it. Such was the day for me. I like looking back now knowing that my tools were bought from a week’s wage and that my woodworking wages were my earnings from working with my hands and the tools i was then buying. It’s a nice thought then that I earned them, worked for them, used them into my then present and future to make my living from. Later I taught my children and others woodworking using them. This is added value beyond the price tag of purchase.

Take off the upper section enables to blade to reach all the way into corners.

Each of my boys has used my tools without really knowing how I felt for them. How could they know such a thing. It’s funny how you hear of millionaires saying they are not cursing their children by leaving their millions to them. My, my what a decision, but oh what wisdom too! I think others might not approach tool purchases in the same way i did and that’s because times have changed. Had there been no alternative they would have likely done the same I am sure. We do what we must, don’t we? It’s always a sacrifice for most of us somewhere along the way. To take possession of our craft I mean. Buy tools we can ill afford and such, put the hours in to learn. Research, that kind of thing.

Buy one as an when you can. no hurry, you will never regret it.

 

15 Comments

  1. Alec Garner on 18 August 2018 at 8:35 pm

    I have seen on occasions No.3/4’s that have been butchered; removing the whole front section, creating a ‘chisel plane’. Whether this was done purely by design (by those in the know, to suit a specialised field of work), or whether it became more cost effective over purchasing a bullnose I don’t know?



    • Juan on 18 August 2018 at 11:30 pm

      It is possible they broke the toe of the plane and instead of tossing it, they repurposed it. I have seen this done a few times on eBay for the Stanley 78 planes. Just a guess.



    • Paul Sellers on 19 August 2018 at 10:22 am

      I think often it is disingenuous sellers that retitle them as such when really they were dropped on concrete and broke at the side of the mouth.



      • Alec Garner on 19 August 2018 at 11:50 am

        Yes, I think that might be the more likely scenario… I imagine it would be most unwieldy in use and virtually impossible for fine work. Hypothetically would having a cap iron (which the bullnoses don’t) prove advantageous on trickier grain; say producing a stopped chamfer in rippled sycamore?



        • Paul Sellers on 19 August 2018 at 2:13 pm

          The planes rely on the fore part to restrain and constrain the grain from lifting ahead of the cutting edge. If the grain is rising towards the cutting iron rather than parallel to the surface it is going to tare, not likely to, it will. I would not want to risk it on a piece I was working. Woodworkers often miss the importance of this part of the plane sole.



  2. Steve on 19 August 2018 at 8:57 am

    Hello Paul,

    I inherited one of these and it’s fairly blunt , are they sharpened the same way (angles) as a No4 plane ?

    Thanks.



    • Paul Sellers on 19 August 2018 at 10:18 am

      Just a straightforward bevel, square across into the corners without rounding them at all. 25-30 degree bevel.



      • Steve on 19 August 2018 at 12:20 pm

        Thank you.



      • Keith on 23 January 2019 at 4:24 pm

        mine ended up with a slight camber, is that okay, or do you recommend a straight bevel from a honing guide



  3. Christopher Dennis on 19 August 2018 at 3:00 pm

    As you have made reference to him a couple of times now I would like to ask – was Mr. Cheapie a travelling tool salesman or a representative of a tool merchant or wholesaler Paul?



    • Paul Sellers on 19 August 2018 at 7:11 pm

      Ah! Mr Cheapie. Mr Cheapie was a middle-aged ancient who bought up seconds stock from Sheffield factories like Stanley and ~Record and a dozen others and traveled the North West region of England to call in woodworking workshops of different crafts to offer his goods at a greatly discounted price–often half price. You could also ask him to buy good, new stock for you and he would deliver the following week. This was not seconds quality but was about 20-30% cheaper than the hardware shop prices. It was a nice time in my life.



      • Christopher Dennis on 19 August 2018 at 10:00 pm

        Great memories Paul – thanks for the reply.



  4. Anthony on 20 August 2018 at 1:54 am

    I love using my Stanley 90 for rabbets.



  5. Wes Carmichael on 20 August 2018 at 12:19 pm

    To some extent we are doubly blessed these days. With the availability of discarded and unwanted vintage tools, it has been possible for me to acquire a very large toolchest’s worth of predominantly 1930s to 1950s saws, planes, chisels, marking and measuring tools and everything in between for less than £250. A little work and they perform to my expectations (untrained diy woodworker), exceeding expectations most of the time. And the beauty is that you often find some true gems (a Preston’s 1391 and a Stanley 50 (the black japanned version) being prime examples)! Furthermore, there’s a feeling that I have to look after and improve my woodworking as I think about the craftsman that owned them previously.



  6. Steve on 14 September 2018 at 9:01 am

    Great shame that extortionate prices are appearing on the internet and from dealers for these old tools now. Well worth waiting and watching flea markets and fairs for something realistic to come along.



  • James Franklin on I Need Another ShedMy father advised me never to give advice to anyone over 16 years of age. You only get acerbic replies if you do even if the advice is well meant! The above exchanges prove he was…
  • David Wood on Life’s a Poem…Hi Paul and Gang, Merry Christmas to you all for 2019. I'm reading James Krenovs' "cabinetmakers notebook" and he is saying exactly what you'r saying about the inclusiveness of all…
  • The Southpaw Woodshop on Life’s a Poem…Well said. Couldnt agree more with the time spent working the wood with handtools, listening and feeling the grains.
  • Greg Werner (USA) on Life’s a Poem…Hi Paul, It's my first visit to your website. I've been voraciously consuming your videos and they have inspired a renascence to wood working days of old - - word working too with…
  • Paul Sellers on I Need Another ShedBut that would be you not me. And of course I find days off and resting the way you suggest very, very tiring too. Oh, and I have never neglected time with my family nor oversteppe…
  • Harry & Margaret on I Need Another ShedTake a break between Christmas and New Year Paul. You'll benefit from the rest, your family will see more of you, and more importantly, your new neighbours will appreciate the peac…
  • Paul Sellers on I Need Another ShedWe film about 98% of the making at my garage in the studio. The filming and editing is as efficient as we can get that way and we have control over everything from light and lighti…
Scroll To Top