1. Headland on 4 January 2019 at 5:44 pm

    A question to which I have never found an answer. Why are dusters yellow?

    • Sigurt Bladt Dinesen on 4 January 2019 at 6:48 pm

      They’re not. They are actually violet, they just appear blue because of the number of blue colour receptors in your eyes.

      • Headland on 4 January 2019 at 6:57 pm

        The yellow cloth that Paul uses to remove dents from the surface of wood with a hot iron, is called in the UK as a duster. It is a general purpose cloth for use in the home. It is soft and very useful for many tasks including removing dust. For decades and possibly hundreds of years they have always been yellow.

        By the way an immensley useful video.

  2. Tom Angle on 4 January 2019 at 5:53 pm

    Thanks for the tips. I really enjoyed them.

  3. DayJ on 4 January 2019 at 6:47 pm

    Great tips… thank you for sharing 🙂

  4. John 2v on 4 January 2019 at 10:39 pm

    Several very handy and “why didn’t I think of that” tips
    Made a pusher for my band saw ….always losing it….not now
    Starting a tennon saw cut ….a simple idea
    Thank you Paul

  5. António Santos on 5 January 2019 at 7:42 am

    These are very nice tips… but I still don’t understand quite well tip #1 and #9, maybe because english is not my native language.
    In tip #1, I don’t understand how shellac prevents the glue from contaminate the finish… the glue will be on top of shellac when the tenon is inserted in the mortise? And then what is supposed to happen? And won’t the glue be used only in the tenon part that really glues to the mortise, in the shoulders?
    At tip #9, I don’t understand why is super glue used. Why isn’t PVC wood glue used to glue the handle? Is super glue used only to finish the fragile parts of the handle, and will wood glue still be used on top of super glue?

    Thanks, regards, and a happy new year to everyone.

    • Paul Sellers on 5 January 2019 at 8:13 am

      1) The glue will wipe off the shellac straight away without smear or stain if you do happen to get glue outside the area within the joint.
      2) The superglue is not to glue the handle in. It may look like that but it’s not. The superglue wicks into the grain fibres by capillary attraction and dries immediately and so strengthens the outer fibres and prevents fracture. Sometimes I use superglue as a shiny wood finish but you must be extra careful if you do that. Superglue and skin is the issue then.

      • Aaron Robarge on 7 January 2019 at 5:23 pm

        The super glue trick is genius. Thank you for sharing these! It so happens I was recently trying to glue on a very small piece of window casing trim (the return, so basically a miter joint) and superglue didn’t cut it. I’m wondering if you’ve had success with superglue acting as a grain sealer to allow gluing of the two surfaces? Epoxy will do it but who wants to go through all that!?

  6. Larry Lumley on 5 January 2019 at 12:00 pm

    Hi Paul. I thought l knew most of the wood working tricks. However you are never to old to learn more.
    I have enjoyed this post. Happy new year.
    Regards Larry.

  7. Sylvain on 5 January 2019 at 7:43 pm

    Happy birthday Paul


  8. Tad on 5 January 2019 at 8:04 pm

    The Video was great- almost as good as the old Q&A videos. I wish you would make more of both.
    Looks like we are off to a great start for the new year!

  9. Martha Downs on 6 January 2019 at 12:55 am

    Some new ones for me, thanks Paul!


  10. David on 7 January 2019 at 11:12 pm

    Let’s have some more!

  11. Steve on 8 January 2019 at 3:39 am

    So many useful tips in just 5 minutes. This format is a great complement to the longer videos for when I have a short break! Thanks!

  12. Peter on 8 January 2019 at 10:35 am

    Many thanks for this very nice video!

    Regarding tip #2, I have never heard of “accelerator”.
    Can someone please elaborate on this?
    I think I saw that the glue and spray can are the same brand; does the accelerator and glue come in pairs, like 2-component glue?

    • Paul Sellers on 8 January 2019 at 1:56 pm

      It is often called Mitre Fix here in the UK. In the USA and the UK there is Zap-a-Gap which is just CA glue or superglue and the accelerator by the same company is called zip kicker. But model shops sell a variety of brands that are less expensive.

  • Paul Sellers on Someone Wrote MeThank you. I don't think that anyone should give up their machines because I or anyone else gives the impression that they should. I doubt that I have ever said to anyone don't use…
  • Kurt on A Gem of a RemnantAnd here I thought I was the only one who found this to be true.
  • Adam on Someone Wrote MeReally interesting discussion here. Could be just semantics, but I think machine woodworking is more of an ability. Something that pretty much all humans have - to be able to feed…
  • Stuart Woodcock on Someone Wrote MeHaving just started my first large project, a 3.5m x 0.85m outdoor table. I have watched a lot of Paul's videos to gain knowledge and inspiration. I can tell you from a novice pers…
  • Stephen Tyrrell on The Draw of Skilled HandsIt goes back much further than that. It was written in the 1920's and has been recorded many many times. Still being recorded by modern swing bands today. A great song and a great…
  • Stephen Tyrrell on Someone Wrote MeIt may be true that your efforts will not influence the mass producers Paul, but you have encouraged, tutored and trained thousands of "lifestyle" woodworkers in a craft that they…
  • Michael McGinnis on Someone Wrote MeThe book "The Perfectionists: How Precision Engineers Created the Modern World", by Simon Winchester, describes very well how we ended up the way we are today; without the skilled…