Today’s Making

Mondays roll around to keep Paul forever on his toes and I am planning on the chamfer plane prototype today in readiness for as early a release as possible. I also have my next project prototyped for filming this coming Wednesday and I think I have brought everything together to make a basic shoji screen using the most basic of western hand tools together with western techniques that keep everything down to earth and very doable. Twinning this tenon or singularising another is one of those intimate choices we crafting artisans might make in the moment or then too plan ahead for. But then ganging up joints has never been my thing because often it is not a speed thing so much as the isolating of individual joints to enjoy the individual fitment of the joints in harmony one to its mate. You don’t gang people-marriages up for a mass wedding, so I feel the same about marrying joints together too. That said, in the video I do plan to show both methods so that you can make an educated decision as to which you might want for your project.

Making panels for room dividing such as shojis is not at all complicated even though you can indeed make the designs as complicated as the human mind incapable of doing. I have made a basic panel, but you can incorporate small panels into the smaller openings using various angles as decorative features. Simplicity seems key to this for me and so my panel is a basic design that can be readily adapted in size without changing all of the principles of making. There is, of course, no compromise in the joinery but, as I said, there is no intention to adopt design elements for the sake of tradition or cultural preference or standards.

I feel what I did simplifies several things so as not to incur extra cost or overly demanding in terms of effort. It is still demanding however and that is what I wanted. The end result is a relatively inexpensive room divider that is attractive and non-invasive, and then moveable and adaptable to various conditions. It is an excellent sun filter to protect an interior from harsh sun or daylight and works as a filter even for photography in various situations. Think too lightbox, lampshade, privacy and much more. The lightweightness of the components and then the overall frames is a delight really, and it also speaks of a more gentle way of living because the panels are, by comparison to many western standards, most gentle and indeed delicate. I liked certain features and instead of following the Japanese traditions and the need for buying in specialist planes and such, I just went with what I had and this was in no way an inferior way. I think you will see what I mean when you see me standing at my bench and my vise. There is a lot of planing to thickness that needs precision and the basic #4 and #5 bench plane takes care of all that. For some minor chamfer work, my bullnose created absolutely perfect bevels and for others, I have put together a basic chamfer plane you can make easily and without fuss from any scraps of wood you like.

8 Comments

  1. My two basic obsessions are hand tool woodwork and Japan. So I am beside myself with joy at the prospect of this. I’m guessing that there won’t be any rice paper involved, due to it being difficult of access, but nevertheless, what an immense privelege this is. My ultimate fantasy is to build a Japanese scholars hut like the one in the British Museum, though no doubt that is far too complex for my limited skill, so I joyfully will settle for this.

  2. Thank you, Paul, for the insights you bring to the table. As a worker who mostly has had a solo career, it’s a real privilege to be able to have you as a wise and experienced voice. That may seem to be laying it on a bit thick, but I mean it in all sincerity. I have found meaning in my work ever since I played with blocks as a boy. It’s a wonder to me that, now that I am retired, my enthusiasm is as high as ever. I look forward to much more of your writing. Every new project I undertake is a voyage of discovery and every new kernel fo knowledge I glean comes to me as if I were the first to invent it. There will always be people with more skill than I just as there will be those with less. That has no impact on the amount of joy I take with each new accomplishment. As a role model and a nuts and bolts instructor you are without peer, imho.

  3. Hi Paul ….this sounds an interesting project….I see you have used a chamfer plane.
    I made one a couple of years ago by adapting a circa 1850-1900 skewed rebate plane.
    I increased its width by gluing a piece of beech to each side….taking care not to block the escapement by extending each hole profile to each new side piece.
    I was then able to screw two pieces to sole to form a vee groove, these are adjustable with slotted holes to give variable sized corner chamfer. I used pan head screws, flat washers and spring washers……waxed with a candle….works perfect…….I wish I could show it to you?
    Thank you Paul for your support in these difficult times.
    Regards John2V

  4. Paul, will you be having any built-in or freestanding screens in your new house? I’m eager to see the furniture designs you are developing for it.
    Regards
    Tony

  5. Hello Paul, if you need some rice paper I will be happy to ship you some

Comments are closed.

Privacy Notice

You must enter certain information to submit the form on this page. We take the handling of personal information seriously and appreciate your trust in us. Our Privacy Policy sets out important information about us and how we use and protect your personal data and it also explains your legal rights in respect of it. Please click here to read it before you provide any information on this form.