Sharpening Your First Crosscut Saw-PartII
…life of the file. Files do wear out through use, but a good file will sharpen many saws. It’s not possible to say how many saws a saw file should…
…life of the file. Files do wear out through use, but a good file will sharpen many saws. It’s not possible to say how many saws a saw file should…
…less ppi than 10 that we would sharpen cross cut. How do you sharpen a saw? https://commonwoodworking.com/sharpening-a-saw/ Handsaw/Panel saw https://www.youtube.com/watch?v=UA5DixEaaUo https://paulsellers.com/2016/04/get-ready-get-set-got-files-go/ Crosscut saws https://www.youtube.com/watch?v=_fNosQU1Ujg https://paulsellers.com/2016/04/sharpening-first-crosscut-saw/ https://paulsellers.com/2016/04/s/ https://paulsellers.com/2016/04/crosscut-saw-sharpening-direct-youtube/ How do you…
…war lethargy. Because western saw makers were putting out low quality products and lived off their parent’s reputation, we in the west saw the saw making demise take saw making…
…truth. I did bench-test the sharpening 40 tenon and dovetail saws with teeth ranging from 20 to 14 PPI using only one end of a double ended saw file made…
…to redeem themselves from now manufacturing such low grade saw files, I was glad to set up the saws and start filing, and file I did. The school’s saws I…
…you about quality files I have used on and off for years now. Nope, don’t wind me up, their not Nicholson any more. They are pretty bad as files go—about…
…use those saw files that already have fractured narrow edges. If you have followed my blogs at all you’ll know that saw files have six facets not three, three broad…
…are mostly for cutting tenons alone. The push-stroke Gent’s saw is my favourite backsaw of all. Coping Saw The coping saw copes with all things curved in cuts. Simple and…
…method I ever saw. It takes me about a minute per chisel, two for a plane iron and the same for a spokeshave. With the saw files I sharpen any…
…for recutting the teeth. Yes, there is a Foley Belsaw saw tooth recutter that mechanically recuts the teeth before sharpening. The recutter stamps out the teeth into the saw plate…