Box Making
…inside of all four faces to fit a board or piece of plywood into. This is the method used in drawer making and can also be used in box making….
…inside of all four faces to fit a board or piece of plywood into. This is the method used in drawer making and can also be used in box making….
…making a dovetail video above. Paul might use a coping saw for rougher carpentry, but the cuts are consistently finer when done with the chisel. There are several blogs discussing this: https://paulsellers.com/2014/10/making-the-toolbox-pare-and-chop-dovetails-and-pins/…
…and tenons for the doors and the back frame above are as perfect too. He’s making one of my Joiner’s traveling toolboxes (below). Currently he’s an amateur. An apprentice. I…
…odd trip to a machine in between are all but gone in most shops these days. Here, I am talking about toolboxes and chests laden with ebony and rosewood infil…
…think that that’s odd? On my toolbox that I have been making I hand planed every surface to a level that I wanted as a replication of features I saw…
I’ll be making a couple of these toolboxes, one for this blog and the other for the filming. The methods will be about the same although there may be some…
Finishing the Toolbox Series In the next few days I will finish off the toolbox series. This has been a popular series that clears up the simplicity of making one…
…the toolbox filming and I was glad to see how many of you are enjoying following the video series. This is about the simplest toolbox to build and there are…
…in a hurry or making a beehive. On finer joinery it’s not really accepted. That said, a tool box of this type would not generally be exemplary of of fine…
Today was another day in the lives of different woodworkers around the workshop. Every day is always special and unique because much of it is somewhat unpredictable. My toolbox build…