Fixing up the bullnose plane didn’t take much at all. The pictures really help when buying via eBay and I usually scrutinise them. Notice on my old model how the nickel plating is now patchy with wear after 50 years in the using, well, by the time i depart this earth there’s a good chance what’s left will remain. My tools have never really rusted or deteriorated through neglect in any way. The longest period of unuse was when I immigrated to the USA in 1987. They were wrapped and packed in newspaper, boxed and shipped in plywood crates and unaccessible for about 5 months. I was lost without them. In Concan, just a few miles north of Uvalde, Texas, a low-loading, 18 wheeler pulled up on the dirt road in the middle of nothing but yuccas and cactus and 32 crates of tools, family possessions and other equipment arrived. I couldn’t wait to reach my personal box of a handful of tools. When my family searched out their toys and treasures of meaning, Lladro geese, scrap books and such, I admit needing only my woodworking hand tools.

Having had my tools within a yard of me most of my life now I realise that, yes, I earned my living using them, constantly relying on them, when they were indeed returned to me it was the obligation I felt to them that mattered most. Most people own things these days that it’s hard to get this close to. A computer and a smart phone is outdated after a few short months and we often keep them until we must exchange them for the newer model because at a given point of obsolescence they become uncoupled and unsupportable. Clothes have become the same. At one time no one would have given up a good woollen coat or jacket until the thing wore out. Now they are discarded like supermarket plastic bags were. Things today seem rarely to wear out as such, they are exchanged on a whim for something newer. It’s only decades later that we realise we’ve polluted with our excesses the natural things around us. Thankfully tools are not like that; they  rarely give way or sway to fashion. I would, could, never trade in my now ‘vintage‘ models because I have owned them for too long and need something newer and faster. They have proved themselves to be equal to everything I have ever asked them to do and the continue to surprise me. The only replacements tend to be excessively overweight, over engineered and totally inflexible. That doesn’t mean no one should perhaps at least consider running some side by side to try out as I have through the years—at least give it a fair trial over a period of time and then see which one they would reach for over another.

So this newer version of the #90 bullnose, possibly made at the same time as my own there in the Sheffield of old when it was a manufacturing centre to be reckoned with, will not replace my own as far as worth goes, it will be a useful tool should I decide to keep it. Then again, I may just choose to give it away now that it’s working so well.

It’s a surprise to see how little wear to the blade has happened now that I have sharpened it for so long. This is because I very rarely grind my tools on power grinders.  A quarter inch in 50 years. At least I found that surprising!

7 Comments

  1. Neil Ramshaw on 21 August 2018 at 10:35 am

    Hi Paul.
    I’m fascinated by your final comment on not grinding on powet grinders. Have been looking for a hand powered grinder for years but no one seems to manufacture one. Do you have one or do you use a coarse grade flat stone for grinding?



    • Paul Sellers on 21 August 2018 at 4:36 pm

      That’s pretty much all I ever use, a coarse 250 grit diamond plate from EZE-Lap. Eats up steel in a heartbeat and never burns the steel.



      • Alec Garner on 21 August 2018 at 8:09 pm

        I really like the speed and efficiently of your sharpening system Paul and have been thinking about purchasing a set of EZE-Lap plates. But I’ve been somewhat put off by comments that some arrived out of square, while others have mentioned corrosion and a disappointing longevity. I’m guessing the latter could be down to user error, or mistaking the initial wear-in as loss of abrasion, just wondered if you’d encounter any similar problems? Oh, and what’s the advantage of using glass cleaner over water?



        • Paul Sellers on 21 August 2018 at 8:32 pm

          Never had a problem with them anywhere so far to date. You can use water but I found auto-glass cleaner reduced or even eliminated rust.



          • Alec Garner on 21 August 2018 at 8:59 pm

            Thanks for the quick reply Paul, much appreciated.



      • Neil on 24 August 2018 at 4:38 pm

        Thanks Paul – useful advice.



  2. Gav on 21 August 2018 at 1:16 pm

    I like the comment about the clothes. The majority of the shirts I use for work start fraying after two years to the point of needing to be repurposed into rags. I have two woollen jumpers however that may stay the course. They were passed onto me by my father after he got out of the army , and being army issue have the manufacturing date on them. 1967, five years before I was born . We seem to lose a lot on the way with the passage of time. Like the modern hollow core door I hung today which had five seperate steel staples embedded in the top rail from construction in the factory. This is where I am glad I have a belt sander and tungsten tipped circular saws. It isn’t all that fulfilling compared to some of the other jobs though and while I can see the expediency of the construction who came up with the idea that sticking bits of steel in timber which requires working with edge tools as a sound idea anyway? The power tools will go the way of the phones and laptops etc . If my son is interested the hand tools that are mine with my Fathers and some from my Grandfather will be his someday.



  • Michael Muschal on MisnomersPaul, I discovered you very recently while surfing the web to started in woodworking. Some decades ago I had tried building a few projects with power tools, but was more afraid of…
  • Paul Keane on Working AloneI must say your website is excellent with lots of information on how to work with and improve my wood working skills. Due to the lockdown I have build a workbench, I have been look…
  • Dan on Branching outSteve, was that the one on display inside a ranger station in California? If so, I have seen that as well. Definitely worth a look to anybody interested. Keep well, everybody.
  • Gary on Working AloneYou are not alone when you go home to your partner at the end of each day. The same person you saw when you awoke this-morning. They're even with you in many ways when you're apart…
  • Paul Sellers on Edge Sharpening Under £10Is it "cheap" plates or 'less expensive' or 'low cost' plates? There is a difference here. Mylow cost plates in all gritt=s are holding up well after almost four months to date. My…
  • Paul Sellers on Edge Sharpening Under £10I might suggest something different here. I think that with the larger diamonds to top angular points fracture more readily and in a sense, create a sort of plateaued top which is…
  • Richard C on Edge Sharpening Under £10with the cheap plates, I find that yes, they wear very quickly initially, but then 'settle'. another thing I've found is that it's possible to scratch the grit off completely if yo…