Plane evaluation – Lightweight thin-ironed planes really work…
…minutes was through all of the bandsaw cut marks and down to a solid oak surface with no bandsaw marks visible. This was using my crowned iron in a #4….
…minutes was through all of the bandsaw cut marks and down to a solid oak surface with no bandsaw marks visible. This was using my crowned iron in a #4….
…an 8-10″ with 10″ as best choice. The Gent’s saw is best saw of all and this size of saw with 14 – 16-tpi will cut small tenons and dovetails…
…a file we all set to to sharpen our own saws. We started at 10am and everyone brought their own saws to work on. We sharpened pretty solidly of about…
I have put out an introduction to bandsaws video to help people who might seriously consider using a bandsaw. The reason is probably obvious but I have used one for…
…background for taking the donkey work out of resawing. Dare I say that cutting tenons on a tablesaw is just resawing. Dare I say that it takes me 8 minutes…
…to see the tree still standing by its roots in time now past. The rough coarseness from a snagged saw tooth caused ridges in arcs, successive with each shouldered shove…
…the bandsaw or by hand depending on my mood and how much work I have already done. Having trued up one face, I ran the board through the bandsaw to…
…for asking this question, Richard, it seems we have both done things in reverse of each other. In many ways I saw writing the book as a bridge between generations…
…comes from studs laminated to size and actually makes a useable bookcase. So here we arrive at the workbench with two sawhorses and a handsaw, a drawing and our cutting…
…one for YouTube and one for Woodworking Masterclasses, and there is additional information available in their respective descriptions: https://www.youtube.com/playlist?list=PLqyeNiM0BJuVmLBiLv8VHIsh1T-aLFO1Y Woodworking Masterclasses series Which blades do your recommend? https://paulsellers.com/2015/10/making-frame-saws/ https://paulsellers.com/2015/10/blades-for-my-bow-saw/ https://paulsellers.com/2015/10/sharpening-your-frame-saw-blade/…