Getting back to real woodworking
…out in the workshop filing saw teeth and even if they were not perfectly formed that saw would most likely cut just fine. What he didn’t realize was that prissy…
…out in the workshop filing saw teeth and even if they were not perfectly formed that saw would most likely cut just fine. What he didn’t realize was that prissy…
…who sells or buys, takes a saw and awkwardly stiffens his stance as if about to wrestle an unknown force of dark. He braces himself, locks his legs and his…
…then drive the plug almost to full depth and cut the plug about a 1/4” shy of full depth with the panel saw. This protects the saw teeth from close…
…of the hacksaw blade… …and cut along the length with the hacksaw again. I removed another section to facilitate the hacksaw blade. To neaten up my cuts (not actually…
…A Timbered Choir Even while I dreamed I prayed that what I saw was only fear and no foretelling, for I saw the last known landscape destroyed for the sake…
…one saw and a pinnacle point in the other by simply reorienting the file in the gullets of the two saw types. Eureka! Experimentation can result in priceless examples. We…
…thickness and the possibility of a certain amount of bandsaw drift, blade bulge and so on. A bandsaw blade, no matter the level of sharpness, no matter the tautness of…
Someone asked if I could repost sizes of a pair of saw chocks from some months back as they couldn’t find in in the archives so here it is. Saw…
…of intensity. I would be teaching at the bench and writing and sketching hands on saws on wood to capture the steps and pass them on in an hour’s time…
…one working in aggression; the too-heavy set on a plane, the heavy saw stroke and such. Each reflects aggression in the same way shouting does in drunkenness. Aggression really has…